Bead Giveaway Blog Hop

When Lesley at the Gossiping Goddess asked if any one wanted free beads, well how could I say no?

Her good friend and lampworker, Kaz Baildon had had a clear out and was left with loads of lovely beads that she didn’t know what to do with so they were sent to Lesley who very kindly offered some of them out to anyone participating in her challenge.

It’s been ages since I’ve made jewellery properly, but I’m a both feet kind of girl, so I threw my name in the hat, and was thrilled when I was chosen as one of the lucky winners.
That thrill soon turned to terror when I received the beads and realised I would have to do something with them and actually show everybody, so here goes…

I’ve never made anything with a heart bead before and the colours are not something I would have gone for, but after a rummage around in my box of stuff, I started to form an idea. I’ve been stashing Czech beads for a while and the matt green rondelles went perfectly with the focal heart. I threw everything that looked like it matched in a pile on my desk and narrowed down a few different bits to go in to the design. The Czech beads were wrapped on to copper wire around the heart with Maroon KO thread and held in place with green magatama drops. I then used one of the spacer beads to add a dangle and finished it off with a vintage Czech glass leaf.

It sat on my desk threaded on the silk strings for a couple of weeks untouched as I puzzled what to do with the other spacer. I considered hiding it, but I’m sure Lesley would have noticed!

I had some round knobbly washers which I thought would make a great toggle clasp, but they were bronze and didn’t match the copper in the rest of the design, so they went in to the electroforming bath for a few minutes and tadaaa… they were copper plated. The final spacer was wired up to make the bar with a couple of loops to hold the silk strings and everything was finished with thin copper wire.

I’m pleased with how the final design turned out, and have really enjoyed taking part in the challenge.

Big thanks to Lesley for organising it all (even when poorly!) and to Kaz Baildon for the beads.

You can see more of Kaz’s lovely beads in her Etsy shop >>>

To see what everyone else has made in the challenge, follow the links below…

And if you would like to see more of my Jewellery designs, please take a look in my Etsy shop >>>

Continue Reading

And the winner is..

Thank you to everyone who took part in my competition and for all the lovely comments!

I’m not going to waffle today, I’m just going to get straight to it and announce the winners 😀

The beads have been counted, and overseen by our independent adjudicator…

There were 226 beads in total.

So in 1st place winning this bead set…

Leah from Beady Eyed Bunny


In 2nd place winning the birdhouse set


And in 3rd place winning the 2 Birdies…

Rejetta Sellers from Jettabug Jewelry.


Congratulations too everyone, I’ll be in touch today to get your addresses and post your beads to you.

Commiserations to everyone else, but a great big thank you for taking part 🙂 x


Continue Reading

Cyber Monday Handmade Sale


On Monday 26th November, The Beads of Clay Group are teaming up with the Love my Art Jewelry Blog to promote Creating Handmade with Handmade for Cyber Monday.

If you haven’t seen it yet, hop on over there for a fantastic blog filled with tons of information, inspiration and beautiful handmade jewellery & components. Just click the picture above to go through to the site.

As a member of the Beads of Clay Professional Artist Team, I will be joining in and offering a 15% discount in my shop on all purchases. Simply enter the code ARTBEADS15 during checkout to claim it 🙂

Happy Shopping x


Continue Reading

Competition time..

To everyone that has supported me and liked my page… I’d like to say thank you! This week I reached 200 likes on my page, it’s sneaked up a few more since then, and each one is really appreciated!

To show my appreciation, I’m offering some prizes to my followers…

First up is this bead set.

It’s a mixed media bead set, put together from beads I have made over the last year. It includes

  • A stoneware dragonfly barrel
  • an earthenware celtic knot flat lentil
  • a spotty silver glass lampwork barrel
  • a birdy
  • a golden raku lentil
  • a copper urchin lentil
  • a stoneware bronze barrel
  • a speckled melon
  • a lustred brown fancy barrel with inset glass cabochons
Second prize is one of my birdhouse bead sets with a Mummy, Baby and birdhouse made in black clay…
And finally, third prize is a pair of birds in my favourite glaze…


So what do you need to do to win? Easy, read on…

Over the last few years of making, I’ve gathered a ridiculous amount of beads. A lot of them are what I’d think of as a bit rubbish, there are all sorts of odds and ends, experiments, damaged beads and some proper fuglies. Although I can’t do anything with them, I can’t bear to throw them away… there are hours of hard work in there, so I’ve thought of something to do with them.

This jar is filled with a few handfuls. I’ve no idea what’s in there, but to win one of the prizes I’m offering, simply share something from my facebook page here, and then come back for a guess at how many are in the jar.

A week tomorrow (Sunday 2nd December) I’m going to count them all out and the nearest the number will win the big bead set, the second, the birdhouse set and the third the two birdies.

Each share will give you one guess. If you’d like more guesses, feel free to pin me, share other things on my page or tweet about it, just pop back here after each go, let me know what you’ve done and have another guess.


Please read through any comments and make sure your answers are different to what others have guessed. If you guess the same as someone else did previously, the comment will be removed for fairness.


I’ll announce the winners on Sunday afternoon 🙂


Good luck, and thank you again! x


Caroline x


Continue Reading

Sales & A Give away..

Not one to miss out on all the fun, I’ll be joining our friends across the pond and celebrating Black Friday and Cyber Monday in my Etsy Shop For anyone who doesn’t know (and I didn’t until I googled it!) Black Friday and Cyber Monday are traditionally the start of the holiday shopping season being the first Friday after Thanksgiving. Shops open early and give discounts to customers to kick off the season.

The Beads of Clay Professional Artists Team are having a Black Friday Through Cyber Monday Sale and being a member, I will be offering 15% off everything in my shop for anyone buying over the weekend. The Sale will run from now until Tuesday morning and to get your discount, simply enter the code BOCCYBER15 during checkout.  There are loads of new beads in there, sets, birds and some really cute little windmills with real turning sails!


To see what others in the team are offering from their shops, just click the pic 🙂


There will be a give away for joining in on the blog, so head on over there and you could win some great handmade ceramic components including one of my birdy bead sets 🙂

We’re also teaming up with the Love My Art Jewelry blog to host a joint Sale for Cyber Monday, but I’ll tell you more about that over the weekend!


Happy Shopping! x

Continue Reading

Metal Prong Challenge


You’ve probably noticed, I’m loving the new Artisan Whimsy site… the challenges are really good fun!

The metal team has issued the Metal prong Challenge, and as this type of setting is something I’ve never done before I thought I’d have a bash. I had some pieces of copper already etched so I decided to chop one of these up to make a backing for one of my ceramic cabochons.  I love it that with all the different things I’ve tried over the years, I’m now at a point where I can make a complete piece of jewellery from start to finish. The end result is far from perfect, but luckily I like the arts & craft/rustic style 😉

For the prongs, I used 2mm copper wire (coz I’m a bit of a wimp and thought they’d be more difficult to make a mess of) and set them on the backing in a similar way to the tutorial on the site (check out the post here) I did mine, slightly differently to the way they showed as I didn’t have any rivets, so just sawed the wire flat and soldered straight on to the backing.

The prongs hold on to one of my ceramic face cabs, and sit above a bezel set amethyst cab. I decided to file the face of the prongs, as the wire was so thick it really stood out and didn’t look right, then when everything was set, it was patinated and polished, and strung on a silk cord with Czech glass, copper and grey stone beads.

Thanks to the Metal Team for setting the challenge. I’ve learned quite a lot taking part, (mainly what not to do!) and I hope to use this style of setting in the future in more designs.

If you’d like to take a look at what others in the challenge have done, here’s a link to their blogs…


The Beading Yogini,

Caroline Dewison, BlueBerri Beads,

Pam Farren,

Mary Harding, Mary Harding Jewelry,

Dawn Horner, Northern Adornments,

Gina Hockett, Freestyle Elements,

Heidi Kingman, My Bead Therapy,

Lisa Laffend,

Laura Medeiros.

Alicia Marinache, All the Pretty Things,

Melissa Muir, Melissa Muir Jewelry,

Melinda Orr, Melinda Orr Designs,

Julie Panusis,

Mary Ellen Parker,

Staci Louise Smith, Staci Louise Originals,

Sherri Stokey, Knot Just Macrame,

Jo Tinley, Daisy Chain Designs Jewellery,

Francesca Watson, Francesca Watson Designs,

Jean Wells,

Linda Younkman, Lindy’s Designs,

Continue Reading

UK Inspiration Challenge

The UK Blog team on Artisan whimsy have challenged members to create a piece of jewellery or component which represents an area of the UK where one of the members live.

The cities for the challenge are Dorset, Edinburgh, Bath, Isle of White, Liverpool and Southampton. I’ve chosen Edinburgh.

Scotland is one of my favourite places in the world, I’ve spent many holidays up in the Highlands and once past Glasgow get that feeling in my tummy that I’m heading home… I think I must have lived there in a previous life!  From a bit of family history told to me by my late Grandad, his parents were lowlanders descended from the clan Lamont. One of these days I will do some research and find out a little more about them. I’ve visited Edinburgh twice as a child and was awestruck by the contrast between the city and the surrounding countryside, so I’ve taken that as my inspiration for my component.

So here’s my piece…

Hopefully you can see the mountains, the sunset sky and the contrast of the grey stone buildings with the windows reflecting the beautiful light.

There are loads of people taking part, to see who and what they’ve created, follow the links below….

The Hosts
Lesley Watt Gossiping Goddess

Rebecca Anderson Songbeads

Pippa Chandler Pip’s Jewellery

Teresa Hulley Bo Hulley Beads

Natalie McKenna Grubbi

Jo Tinley Daisychain Designs


Gale White Bantering Bird on Flickr

Ginger Bishop Lilmummylikes

Cece Cormier The Beading Yogini

Therese Frank Therese’s Treasures

Cilla Watkins Tell Your Girlfriends

Sherry Baun

Kay Toodles and Binks


Therese Frank Therese’s Treasures

Kashmira Patel Sadafulee

Caroline Dewison Blueberribeads

Pam Sears Crazy Creative Corner

Sherry Baun

Leigh Thow Jewellrleigh

Lucy Haslam


Cynthia Machata

Pam Sears Crazy Creative Corner

Sherry Baun

Isle of Wight

Duane Clark Bizzy Bead

Sharyl McMillian-Nelson Sharyl’s Jewelry

Leigh Thow Jewellrleigh

Jean Wright Just Beadey

D Lynne Bowland Islandgirl’s Insights

Lisa Lodge Pine Ridge Treasures

Sherry Baun


Jean A. Wells

Shalini Austin   Jewellery by Shalini

Doris Stumpf Glaszwerg

Sherry Baun

Lennis C Windbent


Sherri Stokey Knot Just Macramé

Sherry Baun

Leigh Thow Jewellrleigh

Kathy Lindemer Bay Moon Design

Continue Reading

Competition Time on AW

If you’ve not heard about it yet… where have you been?

Artisan Whimsy is a new site for makers, creators and lovers of anything Jewellery! Each month there are competitions running, and this month, one of the challenges is to create a Handmade component or piece of jewellery with the theme ‘Berries & leaves’

This is the piece I’m entering in the hope of winning some of their lovely goodies!

Wish me luck!

And if you like this set, it and others are available in my Etsy Shop 😉

Continue Reading

My first Hop!

I’m really excited to be taking part in my first blog hop, organised by the The Gossiping Goddess

For those of you who haven’t seen her site before, (which I doubt is many) the Goddess is the lovely Lesley Watt of TheaJewellery.

Each of the participants will get a gift of free beads from Lesley, from which we have to make a piece of jewellery , accessory or ornament and share what we’ve made.

Beads by Kaz Baildon

Look at all those goodies!!!

The beads are the result of a clear out by the very talented lampworker, Kaz Baildon, and Lesley has kindly decided to share her bounty and give some out to jewellers around the world to take part in her hop. So I put my name in the hat and was thrilled to be picked as one of the lucky recipients of some stash!

I’d decided a few weeks ago that I’m going to start making jewellery again, so this is the perfect opportunity to give me a kick up the bum and get going again. I’m a bit nervous because it’s been a while since I’ve made anything that wasn’t a gift for one of my family (easy work coz they’ve got to say they like it!) but I’ve got 2 chances, and I quite like the thrill of a challenge.

The date for the big reveal is 12th of December, (handy for a last bit of Christmas shopping if you see something you fancy 😉 ) so keep an eye out for a post from me and the other entrants to see what we’ve made.

See you soon!


Continue Reading

Back into the swing…

Well it seems a break from making with clay has done me good. I’ve got lots of new stuff made in the last couple of weeks and I’m liking some of what’s coming out of the kiln!  It would seem that my lovely customers do too as lots of it was snapped up as soon as it was listed 🙂 Thank you x

Here are a few of the new bits I’ve been creating…

Continue Reading

Artisan Whimsy- making stamps & moulds

You may or may not have seen from my earlier post that I’m a member of the Creative bead chat group… they have recently formed a new social network called Artisan Whimsy. It’s a great place where like minded people gather to share their knowledge, help each other out, show off and generally have a good time.

As a member of the ceramics team, I was asked to write a blog post about something to do with clay. For those of you who missed it, or aren’t a member, here’s what I wrote about…

Making stamps & moulds

Despite being a complete sceptic, I’m a typical Aries, which means although I’m creative, I’m also lazy and will find the easiest way to do something. I think that’s why I love clay so much, you can be as impatient as you like with it and still create something great!

So in my quest for less effort and to produce consistent results, I’ve been trying out different ways to make stamps for impressing textures and designs in to clay and generally speeding up the process of filling my big kiln. There are loads more ways of creating stamps and texture sheets, but here’s a few I’ve tried for my designs…



My first try was with plaster of Paris, making a master form in polymer clay, then creating a two sided mould for pressing beads. To make them, I used the small, deep really useful plastic boxes. Fill up to an inch with plaster and as it starts to harden pop the master in so it’s sitting half way in. Once this side has dried, top up the box with plaster so the master is completely covered. While the plaster is still wet, use a paintbrush to rub over the design inside the plaster. This will remove any air bubbles and give you a nice sharp design. Once the top’s dry, pop the whole lot out and the two sides will separate. Pop out the master and leave to completely dry for a couple of days.

These worked great and transferred detail really well, but broke easily and took a few hours to make. They last a long time if you’re gentle with them though.



Then I tried polymer clay. Making a form, then a mould from the form, baking to harden and then using with clay. My first attempt with using the mould failed miserably, I didn’t dust the mould with anything to release it, so ended up picking all the wet clay out and washing and drying it again before I could use it. Once I’d sorted out how to use it properly, it worked really well. I have a few that I made over a year ago that are still going strong. They transfer detail perfectly and are rigid while you’re using them so you can wedge your clay in easily to make sure you fill it up properly, but as I mentioned earlier… make sure you dust them well to get your design out in one piece!



Next I tried a new product ‘Oyumaro’ It’s a mould making compound that works by dropping one or more of the plastic sticks in to boiling water. After a minute it becomes squidgy and can be pressed onto anything you wish to make your mould from. It sets as it cools and holds detail fairly well, but can be a bit fiddly to use. It’s better for making texture plates than a full shaped mould, and great for making a quick reverse image of a stamp. It will stay in the shape you have made it until you drop it in hot water again. Great because it’s re-usable, can be cut and can produce huge sheets by melting lots of sticks together!




And finally, I tried styrofoam. I got this in sheets from a craft supplier. This makes more of a stamp than a mould. To use, I printed my design on to a sheet of paper, then cut a piece of styrofoam to fit. Put the paper with design facing up onto the foam and draw around the lines with a ball point pen. This will transfer a light design on to the foam which you can then deepen using your pen or a stylus tool (don’t press too hard and rip the foam). To transfer, put it on your clay and give it a quick roll over.

The finished design is fairly detailed, but not fantastically neat. For a rustic style, I’d say it’s ideal. A quick whizz over with a wet paintbrush will neaten everything up.

I don’t know how long these will last, the styrofoam is quite brittle, but it holds the shape you have carved in it really well. I think thicker blocks, carved with a sharp knife would create some great, more solid designs.


So there you have it… some quick, and not so quick ways of getting your unique and original designs on to clay.

I hope this has been useful and maybe saved you a bit of time and effort!


Continue Reading

Something different…

I’ve lost my mojo for clay bead making 🙁 Not surprising really, the weather is horrible and I’d clear off if I had the chance! So I decided to leave the clay for a bit and have a go at something completely different. I’ve got a garage full of different things to entertain myself when I’m not feeling very inspired, so I dug out my etching stuff and made these copper cuffs. I’ve been reading all over the place about colouring copper and have never tried it, I think it really makes these designs pop! These and a couple of others will be available in my Etsy shop later 🙂

Continue Reading

Building a Raku Kiln


Hello again… it’s been a while!


I don’t think I’m very good at this blogging lark! Any spare time I get, you’ll usually find me up to my elbows in clay. But every so often when I do remember I have a blog, there’s always lots to say, so here’s a peek at what I’ve been doing…

I decided to make my own Raku kiln… I’ve no idea if it will work, and typically when I’d finished it started raining, so I’ve only had a quick go ( just to test that it didn’t explode or anything), but I’ve taken pictures as I’ve gone along coz I thought it might be interesting! 🙂


So here’s the ingredients…

  • A metal bin with lid from Ikea (I use an identical one for the reduction part of the firing)
  • Ceramic fibre blanket
  • A long arm propane burner
  • Ceramic buttons and Nichrome wire for securing the blanket to the bin
  • Tools
  • Gloves & facemask for cutting the blanket.

A note about the fibre blanket… it’s nasty stuff, I’m still itching from handling it, and that was yesterday morning! You should never breathe in the dust that comes off it and a mask and gloves are essential.

So to start, I cut a circular hole 2 inches wider than the burner on the side of the bin and a slightly smaller one in the lid.

Then I marked even spaces around the sides and drilled holes for the buttons and wire to be fastened in.

It’s a bit mucky in this picture because I had to empty the reduction bin into it the other day when I forgot how many hare beads I’d put in! Note for future, always count what you’ve got! I did give it a clean up after the cutting. I used my Dremel drill with metal cutting discs to cut the holes, I also wore a full face visor mask type thing and welders gloves for this bit… there were a lot of sparks!

I made these buttons from stoneware clay. The nichrome wire goes through them and the blanket, through the holes in the bin, and are bent out to secure it all together.


This is what the bin looks like now all the buttons have been fastened through it. The bricks at the bottom are to hold the kiln shelf which will lift everything I’m firing above the flame.


I filled the lid with a circle of the blanket too, so that when it’s on, it will create a good seal and get the heat going nice and quickly. Once they were all fastened in, I cut the blanket out of the burner and vent holes.

The last job was to make the kiln shelf. As I’m too tight to buy a round one, I cut it from a square one I had, again using my dremel drill (that thing’s worth it’s weight in gold!) and about 15 cutting discs… they’re pretty tough to get through!


The shelf went in on the bricks, I put the lid on and lit the burner! It was a bit scary, but sure I’ll get used to it after a few goes. The heat that comes from it is amazing, definitely not something I’ll be doing with the kids around!


So the only job left to do is a proper firing. Hopefully, I’ll get a couple of hours to play over the weekend… but for now, I have tons to do for my next fair. I’ll be at Haydock racecourse for the Beads up North Fair on Sunday 29th July… Hope to see you there!

Continue Reading

What’s your favourite colour?

If you were to ask me that question on any day of the week, the answer would be a very definite purple… but not today!

Today my favourite colour is brown, not very exciting, a colour associated with some of the less attractive things in life, but today it’s most definitely brown!

Why? Well scroll down for the answer!






On the second attempt, I’ve managed to grow some crystals in my kiln. They’re not the prettiest, but they’re there!

The first attempt, failed miserably, I think I spotted one or two on the very edge of the test pieces, but you had to look very very closely! This time, I altered the recipe, added a couple of extra bits to see what happened and got the results above.

The designs need refining and the application of the glaze is a little heavy handed, but with some tweaking, I think I can get these looking really good… and with some added ingredients, I’ll hopefully come up with some more desirable colours!



Continue Reading

This Year I will mostly be

Mixing my own glazes!

Isn’t it always the way that all the lovely colours you see on ceramics are secret recipes, mixed by skilled craftsmen & women with years of testing & experience? Well I’ve decided that this year, I fancy a bit of that, so I’ve just taken my first steps in mixing my own colours.

I’ve been really taken by a particular type of glaze, crystalline. The effects achieved from carefully controlling the heating and cooling process are incredible! Just take a look at some of the beautiful wares I’ve found while researching…



You have to agree, they’re incredible!

Eventually, my hope is that the pottery wheel that has been gathering dust in the garage will be put to good use in creating items as gorgeous as those above, but for now, I’m going to attempt to put this effect on to some of my beads.

So today, I have started developing my own recipes. I have a huge box full of different raw materials of which I’ve chosen a few to start me off. As I write the kiln is clicking away with my first pieces. Fingers crossed, when they come out, they’ll be cabochons with some of these beautiful crystals grown on them. But that’s the worst thing about ceramics, until you open the kiln on the following day, you never know if something has worked. It’s a long process to get from raw clay to finished item, and although the actual time spent making a bead, button or cabochon may only be a few minutes of shaping, painting and loading into the kiln, the whole process takes at least 4 days… not good for someone with a severe attention problem!

So I’ll go now and check my kiln, for the 15th time in the last hour, just to make sure it hasn’t reached top temperature of 1100 degrees while I wasn’t looking!

Keep everything crossed for me that tomorrow I get at least one crystal and that this is the start of something great!





Continue Reading